Kitchen Sink Polishing Adelaide

Mr Mazzeo Is The Sole Owner And Sole Operator Of A M P S (Abel Metal Polishing Services)

He First Registered As A Metal Polishing Business In 1980. He Has 40 Years Of Experience To Date. His Foundation In Kitchen Sink Polishing in Adelaide Came As A Result Of 10 Years With A Sink Manufacturer In Bandoura In The ‘70s. The Name Of That Company (Which Is No Longer) Was Mytton Rodd Ltd Who Were Also Known As Grosvenor Rodd, Manufacturers Of Stainless Steel And Silver-plate Cutlery And Table Accessories.

The Service Of Kitchen Sink Polishing Adelaide Is More About The Sink Or Wash Trough Being Restored To A New Condition If The Customer Requires That. A Sink Is Typically Rubbed Down To Remove The Scratches And Then Polished Over. The Concept Of Simply Polishing A Sink Without The Preparation Beforehand (Mark Removal) Is A Complete Waste Of Time And Money. Polishing Over The Marks Only Highlights Them, Thus A Total Waste Of Time.

No Other Metal Polishing Company Has Had The Experiential Know-how And Expertise As Has Had Mr Mazzeo In This Regard. Mr Mazzeo Also Provides His Services On-site, So That The Sink Or Wash Trough Does Not Have To Be Removed, Thereby Incurring Huge Costs To Disassemble And Then Reassemble By A Plumber Or Builder Or Suitable Tradesperson. Mr Mazzeo Also Provides A Whole Range Of Hole Cutting Services With The Installation Of The Strainer Baskets Being The Most Popular, And Again, On-site If Need Be.

Mr Mazzeo Was Motivated To Provide The Sink Polishing Service In Adelaide Based On Several Main Aspects:

Promoting Recycling. Good Quality Stainless Steel Will Not Corrode And Can Be Used And Reused.
The Sinks And W/troughs Of The Yesteryear Era Were Made Of Thicker Stainless Steel. This Meant That They Were Stronger. Mr Mazzeo Has Taken Measurements Of The Thicknesses Of The Sinks Down The Years, And They Have Gone From 1.1mm To .7mm On The Drainer With .45 Mm In The Bowl, That Is To Say, They Are “paper-thin” And Prone To Perforation.
A Regular Complaint From A Woman These Days Is That She Has Dropped A Knife Or Fork And It Has Perforated The Sink Bowl. Sad To Say, But This Problem Cannot Be Fixed. Welding On Such Thin Metal Would Create A Bigger Hole.
The Other Point Being That The Stainless Grading Or Quality Has Decreased. The Global Standard For Many Years Was 18-10 (18 Percent Chrome And 8 Percent Nickel Plus Small Percentages Of Other Metals)
Approximately 18-20 Years Ago, China Claimed To Meet World Parity, But In Reality, Their Grading Was A 13-8 Standard. The Result Is Being Manifest As Rust Specs Or Spots After Some Time Of Use. This Complaint Is Rampant In Numerous Products Made Out Of Stainless Steel. Mr Mazzeo Has Had To Re-polish Many Assorted Stainless Steel Products To Rectify This Ongoing Problem.

The Cost Of Kitchen Sink Polishing, Rather, Restoring The Sink To New Condition Was Going To Be Always Cheaper Than Buying A Sink Of That Same Standard. The Sink Restoration Service Was Never Meant To Go Head To Head With Cheap And Nasty Sinks Coming Out Of China. Such Items Are True “throw-away” Units After Use.

Mr Mazzeo Was Chosen In The Late ‘ The 80s To Polish The Rundle Mall Balls, An Iconic Landmark For Adelaide City. He Provides A High Standard Of Operation To All Metal Polishing Work That He Does. Mr Mazzeo Is The Only Person That Provides Proper On-site Kitchen Sink Polishing (Restoration) Service In South Australia.

He Believes That Extra Care And Diligence Are Required On-site, Such As Masking, Covering Up, And Final Cleanup After Completion. Mr Mazzeo Takes Purposeful Time Before The Start Of Any Job, To Discuss It Thoroughly With The Customer, Unlike So Many Tradies That Want To “Get On With It” Because “Time Is Money” And Vice Versa.

Stainless Steel Strainer Baskets

Mr Mazzeo Is Well Supported By Oliveri Industries And Tasman Sinks In Regards To Kitchen Sink Polishing And The Installation Of The Stainless Steel Strainer Baskets. Mr Mazzeo Can Also Provide The Hole Cutting Service For Anyone Requiring A Food Disposal Unit (Muncher) On-site Or In The Workshop.

For Plumbers Involved In The Installation Of Commercial Wastebaskets, Mr Mazzeo Meets With The Plumber To Do The Sink Or Wash Trough Modifications On-site So That The Waste Units Can Then Be Put In Place. Mr Mazzeo Has Flexible Hours Of Operation, Preferring To See Clients After Hours Or On Weekends Where He Can Devote More Time To The Consultation Process.

Mr Mazzeo Polishes Many Domestic And Automotive Items As Well. Those Requiring A High Polish Finish Will Be Pleased To Know That He Understands Those Wanting The “bling” Factor On Their Show Car Or Motorcycle. Mr Mazzeo Views Good Clear And Detailed Communication As Very Important So As To Satisfy The Customer With Their Particular Needs

Furthermore, All Work Is Documented To Eliminate Any Misunderstandings. Mr Mazzeo Does Not Employ Others To Do The Work. He Is A One-man Business, Handling Your Job From Start To Beginning And Prides Himself In A High Standard Of Work Ethics Without All The Legalism The Only Point Of Contact Is By Phone, Where Mr Mazzeo Will Meet The Client By Appointment After The Initial Phone Conversation,

In Or Out Of Business Hours. Phone (08) 83333282. Mr Mazzeo Welcomes All Genuine Enquiries For Any Item That Needs Metal Finishing Or Polishing.